Mixing

[Not so tiny]

Blending var powder with creatine .. whats the gram for gram cut amount ?

Thanx : Tiny

 

[boxerjake]

bump to this .. anyone ?

Good question considering the amounts of chinese powders floating around nowadays

 

[fcfmuaythai]

depends what dosage you want in your caps, and how many caps you are making at a time. I use a cap-m-quick that makes 50 at a time. For 50 caps at 25mg a piece, you use 1.25 grams var, and mix that with about 11 or 12 grams creatine, mix it good (with a coffee grinder), and cap it. You will need to tap it down a few times to get it all in the caps, but this is how I do it, and it works great

 

[boxerjake]

Where do you find the information for reducing the var with filler or creatine inorder to figure out what the final mg strength will be ?

 

[fcfmuaythai]

well, if you have 50 caps to make, and you want them to be 25mg/cap, you multiply 50 x 25mg = 1250mg, or 1.25 grams. The amount of filler can vary, but as long as that amount of anavar is in the mixture, and it is evenly distributed, there should be 25mg of anavar in each of the 50 caps.

 

[boxerjake]

Ahhh ... there go , just had to hit my self in the head with a hammer to remember grade 6 math again .. lol

Thanx

 

[1392477]

depends what dosage you want in your caps, and how many caps you are making at a time. I use a cap-m-quick that makes 50 at a time. For 50 caps at 25mg a piece, you use 1.25 grams var, and mix that with about 11 or 12 grams creatine, mix it good (with a coffee grinder), and cap it. You will need to tap it down a few times to get it all in the caps, but this is how I do it, and it works great

Agreed - it really is that easy!