LSP test supsension

[OZ23]

I was wondering what gauge to aspirate the suspension and what gauge to use to inject.

Right now I am using a 20 gauge and it is still a little hard to get a lot of the test out. I get more water out. I shake the hell out of it too. Then when I inject with a 22 gauge I am left with some test powder in the syringe b/c it wouldn't pass through the 22 gauge. I shake the syringe as well. I am getting probably half of the powder in my muscles but I feel like I am wasting a lot and only getting half is not going to help me.

Help please.

 

[25homes]

First of all you aspirate and inject with the same needle.....I take it your asking what gauge to pull with from the vial....Bro try this: Put a coffe cup of water in the Microwave...hit it with hear for about 1 minute..then place your vial of suspension in the hot water to dissolve some of the crystals draw change pins and shot while it is still warm!!! I hit my suspension through a 27g no problem by doing this!!!

 

[BLACKDOOG]

So your saying the LSP suspension cloggs real easy in a 22 guage syringe? If that is the case I will not be purchasing any.

I was wondering what gauge to aspirate the suspension and what gauge to use to inject.

Right now I am using a 20 gauge and it is still a little hard to get a lot of the test out. I get more water out. I shake the hell out of it too. Then when I inject with a 22 gauge I am left with some test powder in the syringe b/c it wouldn't pass through the 22 gauge. I shake the syringe as well. I am getting probably half of the powder in my muscles but I feel like I am wasting a lot and only getting half is not going to help me.

Help please.

 

[OZ23]

First of all you aspirate and inject with the same needle.....I take it your asking what gauge to pull with from the vial....Bro try this: Put a coffe cup of water in the Microwave...hit it with hear for about 1 minute..then place your vial of suspension in the hot water to dissolve some of the crystals draw change pins and shot while it is still warm!!! I hit my suspension through a 27g no problem by doing this!!![/QUOTE

I will try this. So, when you heated up water and placed vial in it and drew up suspension, you didn't get any clogging?

I am about to try this. Thanks.

 

[ItalianMuscle27]

I was wondering what gauge to aspirate the suspension and what gauge to use to inject.

Right now I am using a 20 gauge and it is still a little hard to get a lot of the test out. I get more water out. I shake the hell out of it too. Then when I inject with a 22 gauge I am left with some test powder in the syringe b/c it wouldn't pass through the 22 gauge. I shake the syringe as well. I am getting probably half of the powder in my muscles but I feel like I am wasting a lot and only getting half is not going to help me.

Help please.

Then use an 18g. Everything goes through an 18g no problem.

 

[ItalianMuscle27]

First of all you aspirate and inject with the same needle.....I take it your asking what gauge to pull with from the vial....Bro try this: Put a coffe cup of water in the Microwave...hit it with hear for about 1 minute..then place your vial of suspension in the hot water to dissolve some of the crystals draw change pins and shot while it is still warm!!! I hit my suspension through a 27g no problem by doing this!!!

Can I ask whose suspension passes through a 27g?

 

[OZ23]

It looks like I will have to use an 18 gauge. Good grief.

 

[gautho]

try working with the suspension very, very fast . From the time you draw it till the time you shoot it should be less than 10-15 seconds, thus it will not have time to clot. Your probably taking much longer than this.

 

[ItalianMuscle27]

I mix mine with b/12 and winstrol, and never have a problem using a 22g.

 

[monster2929]

I Run It Undr The Water In The Faucet For About Two Minutes, Swab The Vial ,pull With 18g, Pop The Other Pin On And Bang It Fast, U Have To Get This Down For A Couple Times Bfore Ti Will Work, But U Gotta Be Quick With It, Susp Is Agood Drug But Very User-unfriendly

 

[monster2929]

oh yeah bro, besides the viscocity of the susp, let me know how the results are of the LSP it is new and i might take some fo a spin this summer SO LET A BROTHER KNOW!!!

 

[Retabolil2]

I mix mine with b/12 and winstrol, and never have a problem using a 22g.

Thats a good idea. and clogging is a common problem with all test suspensions brands I ever tried. and sure you can avoid problems like that if you use 18g needle.

 

[ItalianMuscle27]

I have yet to see a suspension go through a slin without clogging. Not possible in my opinion.

 

[OZ23]

Well guys I just got some 18g needles in and this is a first time for me. I have only used down to a 22g before. Suspension came out wonderful. Got all of my 100mg per ml out instead of 20mg per ml. to my disbelief, I actually enjoyed using the 18g in the glutes very well. The needle seems to be much sharper than any other gauge I have used. Didn't hurt, didn't bleed, it was awesome. Feeling pumped as well for the first time using this stuff b/c I actually got all the 100mg. Right now I am 5'10" 204 7.5% BF, I will update in 2 weeks with my new weight for monster2929. (I know it will mostly be bloat, but this is for a pre-load).