Please Scroll Down to See Forums Below
napsgear
genezapharmateuticals
domestic-supply
puritysourcelabs
UGL OZ
UGFREAK
napsgeargenezapharmateuticals domestic-supplypuritysourcelabsUGL OZUGFREAK

How do I use HCG that I have

biteme

MVP
EF VIP
I bought some HCG by Organon. It came in 2 vials. One water, the other 10000 iu's. It came from Mexico. I read on here that I should take 500iu's a day for 2 weeks. How do you do that after you break the vial open, you can't close it up. Also, I'm guessing that it didn't need to be refrigerated until after opening the vials. Thanks. Also, can I get insulin pins easily at the pharmacy?
 
OK take the bottle with powder stick the needle in there and pull the plunger (suck the air out) Repeat this about 5x. It may not seem you are pulling air out but you are. Next stick the needle in the bottle of solution pull it all out and put it in the bottle with the power in it. Mix it all untill it is clear. I would take 2000ius every other day for 10 days. Yes you have to keep it refrigerated after it is mixed. Pins it depends on what county you live in. I think the isulin pins are the best for HCG. Karma???
 
T2O said:
OK take the bottle with powder stick the needle in there and pull the plunger (suck the air out) Repeat this about 5x. It may not seem you are pulling air out but you are. Next stick the needle in the bottle of solution pull it all out and put it in the bottle with the power in it. Mix it all untill it is clear. I would take 2000ius every other day for 10 days. Yes you have to keep it refrigerated after it is mixed. Pins it depends on what county you live in. I think the isulin pins are the best for HCG. Karma???

Thanks dude. The vial has to be snapped off. How are you going to suck out air if it is already exposed to the air? Karma anyway and hope you can still help.
 
:confused: Damn I have never heard of that! When you snap off the top there should be a rubber stopper there. It should all be air tight. If you are sure there isn't a rubber stopper I will have to do some thinking.
 
T2O said:
:confused: Damn I have never heard of that! When you snap off the top there should be a rubber stopper there. It should all be air tight. If you are sure there isn't a rubber stopper I will have to do some thinking.

no. It is also made by Serona and not Organon as I thought. It says Profasi gonadotrofina corionica. It's all in Spanish. It looks like a white spongy material all clumped together
 
no there is no rubber stopper?? Yeah the powder will look strange. Like clumped up and crap. Mine always looks like a styrofoam (spelling??) disc. Sorry man can't help if no stopper. The only thing I would think of doing is mixing it then going to a pharm and asking for some sterile water. A bottle with a rubber plug. Take the water out with a pin and put the mixed hcg in then refrig.
 
somebody fuckin tell me. Which vial do I mix the stuff in. Once they are broken it will be exposed to the air. Do I just pour the water into the powder vial. You won't be able to shake or stir. Then do i just get several pins and draw all of the stuff and then refrigerate since you can't store the stuff in a broken vial with no top.
 
a bit confusing in terms of how much

I may be off topic a bit but maybe it will help you:
must be kept refrigerated once mixed and good for about a month after mixed.
inject under skin w/slin pin (I prefer stomach)
example/

profasi 10,000iu kit comes with 1cc of sterile water. Once you reconstitute, 10ius on an insulin point equals 1000ius

So many don't know how to convert to do over 3 week period with slin pin i.u.'s and converted it to an easy for me to convert by slin i.u's over 3 weeks on paper. 5 i.u's everyday of profasi 10,000 iu kit will last like 20 days..
optimium dosage with clomid/hcg from many many articles for 3 weeks, (read article below for times) just my way seems simpler to me 5 iu's a day for 20 days = 10,000iu kit.

5 slin iu's times 20 days = 10,000 i.u's
it can be a bit confusing to newbies to hcg
---------------------------------------------
Additional Information
One of the most frequently asked questions on MuscleTalk is how to use Clomid and HCG correctly.

(A note to Americans - when I say 'oestrogen' I mean 'estrogen' - we spell it correctly in the UK!)

Why Bodybuilders Use Clomid
Clomid is a generic name for Clomiphene Citrate and is a synthetic oestrogen. It is prescribed medically to aid ovulation in low fertility females. Another generic name is Serophene.

Most anabolic steroids, especially the androgens, cause inhibition of the body's own testosterone production. When a bodybuilder comes off a steroid cycle, natural testosterone production is zero and the levels of the steroids taken in the blood are diminishing. This leaves the ratios of catabolic : anabolic hormones in the blood high, hence the body is in a state of catabolism, and, as a result, much of the muscle tissue that was gained on the cycle is now going to be lost.

Clomid stimulates the hypothalamus to, in turn stimulant the anterior pituitary gland (aka hypophysis) to release gonadotrophic hormones. The gonadotrophic hormones are follicle stimulating hormone (FSH) and luteinizing hormone (LH - aka interstitial cell stimulating hormone (ICSH)). FSH stimulates the testes to produce more testosterone, and LH stimulates them to secrete more testosterone. This feedback mechanism is known as the hypothalamic-pituitary-testes axis (HPTA), and results in an increase of the body's own testosterone production and blood levels rise, to, in part, compensate for the diminishing levels of exogenous steroids. This is vital to minimise post cycle muscle losses.

Not all steroids do cause shut down of the feedback mechanism. Everyone is different and you must also take into account how long you have been using a certain steroid and at what dose in order to determine if you need Clomid or not.

Clomid also works as an anti-oestrogen. As it's a weak synthetic oestrogen, it binds to oestrogen receptors on cells blocking them to oestrogen in the blood. This minimises the negative effects like gynecomastia and water retention that may be a result of oestrogen that has aromatised from testosterone.

It's effect as an anti-oestrogen are quite weak though, and it should not be relied upon if you are going to be using androgenic steroids that aromatise at a rapid rate, or if you are pre-disposed to gynecomastia. Arimidex and Nolvadex (Tamoxifen) are far more effective anti-oestrogens.

Important note: Clomid does not, as is often thought, stimulate the release of natural testosterone, but rather works at reducing the oestrogenic inhibition caused by the steroid cycle. It does this in a similar manner to the way it and Nolvadex block oestrogen receptors in nipples to combat gyno development, i.e. by blocking the oestrogen receptors in the hypothalamus and pituitary thus reducing the inhibition from the elevated oestrogen. This allows LH levels to return to normal, or even above normal levels, and in turn, natural testosterone levels to also normalise.

Inhibition of the HPTA is caused by either elevated androgen, oestrogen or progesterone levels. On cessation of the steroid cycle, androgen levels begin to fall and Clomid dosing is normally commenced according to the half-life of the longest acting drug in the system (see below).

This may also explain the reason individuals often find post-deca recovery more difficult, as the progesterone presence is untouched by the Clomid. We know that Clomid and Nolvadex (being very similar chemically) are both ineffective with regard to reducing progesterone related gyno, so it is reasonable to assume that Clomid has little effect against progesterone levels.

Clomid During A Cycle
When we use anabolic steroids, the level of androgens in the body rises causing the androgen receptors to become more highly activated, and through the HPTA, a signal tells our testes to stop producing testosterone. During a cycle the body has far higher than normal levels of androgens and, as long as this level is high enough, Clomid will not help to keep natural testosterone production up. It will be almost all but completely shut off, in theory.

Some heavy androgen users, however, do advocate a small burst of Clomid mid-cycle, though it must be hard for them to say if it really of any benefit, due to the amount of gear they are using. Therefore, the only purpose of Clomid during a cycle is as an anti-estrogen.


When To Start Clomid
The correct time to commence Clomid depends on the type and cycle of steroids you have been using. Different steroids have different half-lifes (indicates the time a substance diminishes in blood), and Clomid administration should be taken accordingly.

As we have seen above, Clomid taken when androgen levels in our blood are still high will be a waste. It is crucial to wait for androgen levels to fall before implementing our Clomid therapy. However, if taken too late we could possibly lose gains.

The list below determines when you should start Clomid. Select from the list any steroids you've used in your cycle and whichever one has the latest starting point is the time to commence Clomid. For example, if Dianabol, Sustanon and Winstrol were cycled, the time for administering Clomid should be 3 weeks post cycle, as Sustanon remains active in the body for the longest period of time.

Steroid Time after
last administration Length of
Clomid Cycle
Anadrol50/Anapolan50: 8 - 12 hours 3 weeks
Deca durabolan: 3 weeks 4 weeks
Dianabol: 4 - 8 hours 3 weeks
Equipoise: 17 - 21 days 3 weeks
Finajet/Trenbolone: 3 days 3 weeks
Primabolan depot: 10 - 14 days 2 weeks
Sustanon: 3 weeks 3 weeks
Testosterone Cypionate: 2 weeks 3 weeks
Testosterone Enanthate/Testaviron: 2 weeks 3 weeks
Testosterone Propionate: 3 days 3 weeks
Testosterone Suspension: 4 - 8 hours 2-3 weeks
Winstrol 8 - 12 hours 2-3 weeks


How To Take Clomid
Clomid has a long half-life (possibly 5 days), so there is no need to split up doses throughout the day. If Sustanon has been used and Clomid is commenced 3 weeks after the last injection, I would estimate that androgen levels are low enough to start sending the correct signals. If androgen levels are still a little high, we need to start at a high enough amount that will work or help, even if androgen levels are still a little high. Try 300mg on day 1; then use 100mg for the next 10 days; followed by 50mg for 10 days.

Using HCG
It is our opinion that HCG is probably one of the most misunderstood and misused compounds in bodybuilding. Hopefully this information will go some way towards rectifying that for the members of MuscleTalk. HCG stands for Human Chorionic Gonadotrophin and is not a steroid, but a natural peptide hormone which develops in the placenta of pregnant women during pregnancy to controls the mother's hormones. (Incidentally, this is the reason you may hear of people testing for growth hormone (HGH) with a pregnancy testing kit - If their HGH shows 'pregnant', they've been ripped-off with cheaper HCG - but we digress slightly).

Its action in the male body is like that of LH, stimulating the Leydig cells in the testes to produce testosterone even in the absence of endogenous LH. HCG is therefore used during longer or heavier steroid cycles to maintain testicular size and condition, or to bring atrophied (shrunken) testicles back up to their original condition in preparation for post-cycle Clomid therapy. This process is necessary because atrophied testicles produce reduced levels of natural testosterone, this situation should be rectified prior to post-cycle Clomid therapy.

HCG administration post-cycle is common practice among bodybuilders in the belief that it will aid the natural testosterone recovery, but this theory is unfounded and also counterproductive. The rapid rise in both testosterone, and thus oestrogen due to aromatisation, from the administration of HCG causes further inhibition of the HPTA (Hypothalamic/Pituitary/Testicular Axis - feedback loop discussed above); this actually worsens the recovery situation. HCG does not restore the natural testosterone production.

The typically observed dosing of 2000 to 5000IU every 4 to 5 days causes such an increase in oestrogen levels via aromatisation of the natural testosterone that this has been responsible for many cases of gynecomastia.

From the above discussion it is clear that HCG is best used during a cycle, either to:

1) Avoid testicular atrophy, or
2) Rectify the problem of an existing testicular atrophy.

Doses of HCG
Smaller doses, more frequently during a cycle will give best overall results with least unwanted side effects. Somewhere between 500iu and 1000iu per day would be best over about a two-week period. These doses are sufficient to avoid/rectify testicular atrophy without increasing oestrogen levels too dramatically and risking gynecomastia. This dosing schedule also avoids the risk of permanently down-regulating the LH receptors in the testes.

Presentation and Administration of HCG
Synthetic HCG is often known as Pregnyl (generic name) and is available in 2500iu and 5000iu (not ideal for the above doses!). Administration of the compound is either by intra-muscular or subcutaneous injection. It comes as a powder which needs to be mixed with the sterile water. The powder is temperature-sensitive prior to mixing and should not be exposed to direct heat. After mixing, it should be kept refrigerated and used within a few weeks - though there are sterility issues which need to be considered after mixing.

Summary and Price of Clomid and HCG
Clomid is more effective than HCG post cycle, but some long-term users like to use HCG during a cycle, or to prepare the testes for Clomid therapy.


__________________
 
Thanks bro, I did a search and read this last night. Good stuff. I'm still not clear on how to store though. It seems the only way is to draw all of the stuff out and store it in the pins in the refrigerator. Also what does reconstitute mean. They throw that word out there like the average person is going to know what it means. Will the styrofoam stuff just disolve when the water is poured over it?
 
Add the water to powder with the water given bro. After combining you need to refrigerate and it is good for about a month.

A 10,000iu kit comes with 1cc (or ml.) of sterile water. Once you reconstitute, 10ius on an insulin point equals 1000ius and done 10iu points (slin pin).
If no vial to put in preload slin pins and refrigerate.

Reconstitute is when you combine water and powder in one.

your other question was:
Will the styrofoam stuff just disolve when the water is poured over it?
yes, instantly..it should be the active powder.
 
DangerousGrounds said:
Add the water to powder with the water given bro. After combining you need to refrigerate and it is good for about a month.

A 10,000iu kit comes with 1cc (or ml.) of sterile water. Once you reconstitute, 10ius on an insulin point equals 1000ius and done 10iu points (slin pin).
If no vial to put in preload slin pins and refrigerate.

Reconstitute is when you combine water and powder in one.

your other question was:
Will the styrofoam stuff just disolve when the water is poured over it?
yes, instantly..it should be the active powder.

Thanks a lot bro, i think i'm ready now to give it a try. When I go to pharmacy, do I just ask for insulin pins?
 
OK, I get Profasai in 2 glass ampules. One is 1ml of water and the other is the powder. Here's what I do, it works great.
1)Use ampule cutter to score and remove tops from both ampules
2) Add the WATER to the POWDER! Take a 1 1/2 inch 3cc spike and suck up the 1ml of sterile water and squirt it into the powder ampule. The long spike allows you to stir the stuff up a bit and easily remove it to transfer to a 10ml EMPTY STERILE VIAL.It may foam a little, thats OK. Yeah, it helps if you suck the air out of the empty vial with another syringe first. Now you got 5000iu from 1ml sitting in a nice vial you can refridgerate.
3) I like to use HgC IM so I always add 1more mililiter of sterile water so 5000iu now equals 2 cc. Get it? This is much easier to measure out now.Get the vial and the water from www.getpinz.com. Now, voila 1 ml eguals 2500 iu which is the post recovery shot dose that I like. If you want a differnt dilution, then add as much water as you want to achieve X iu of HgC per 1 ml.
Caution: You can screw this whole deal up by not follwing sterile procedures.Some fo mine are as follows:
1)Wash your hands and do not rub nose or try to touch anything but your work.
2)Clean work area. (do this first)
3)Throw away the getpinz vial after a few times of filling it. They are real cheap
4)Always wipe the rubber stopper with an alcohol pad and let evaporate, before inserting needle.
5)Try not to contaminate your sterile water ($8.00) with anything.
 
Thanks a lot bosundave. I'm not taking it post recovery, So i'm going to shoot 500 iu for 10 days every 6 weeks. What does iu ed mean? Also I just came back from the pharmacy. I asked for slin pins. He said that I would have to come back because they had at least 10 different kinds and I needed to be specific.
 
^
 
DangerousGrounds said:
type 3/10th cc
29ga
U-10
B-D
29 gauge

30 iu units per pin.

Thanks again Bro, sorry about all the questions. How are you going to take a 500 iu shot if the pins only holds 30 iu's?
 
Its can be confusing..pins I described hold 30 iu each

10ius on an insulin point equals 1000ius in typical HCG kit.....

The IU units are on the pin and its translates in terms of slin iu points as follows for typical 10,000iu kit:

a 10,000 iu kit if taken 5iu a day for 20 days=10,000..

Thats how I dose a 10,000 iu kit 20 days, you will find it works very well spread out ED for 20 days.

10ius on an insulin point equals 1000ius.....(on slin pin).
5ius on slin pin=500iu of 10,000iu kit.
thats assuming you used the 1 ml of bac water it came with.
confusing hugh
':p
 
Last edited:
Re: Its can be confusing..pins I described hold 30 iu each

DangerousGrounds said:
10ius on an insulin point equals 1000ius in typical HCG kit.....

The IU units are on the pin and its translates in terms of slin iu points as follows for typical 10,000iu kit:

a 10,000 iu kit if taken 5iu a day for 20 days=10,000..

Thats how I dose a 10,000 iu kit 20 days, you will find it works very well spread out ED for 20 days.

10ius on an insulin point equals 1000ius.....(on slin pin).
5ius on slin pin=500iu of 10,000iu kit.
thats assuming you used the 1 ml of bac water it came with.
confusing hugh
':p

thats what I said bro for a 10,000 iu kit.
 
I just got 10 insulin syringes. Can I just inject 1000 i.u.'s for 10 days. Also where do I inject myself? Hurry please.
 
I fucked it up. Once I mixed the stuff, the insulin syringes were too small to draw it out. I used a regular syringe and drew it out and attempted to fill insulin syringes. I overfilled, could not see the liquid in the tiny syringes. When I put stopper back in the syringe, some juice came out. I've only got 2 syringes filled with about 25iu's. Chalk it up to a learning experience. I also injected into the ass. I couldn't find anything on search telling where to inject except subcutaneously or IM. Read your post too late DG. Is it o.k. to inject in the ass.
 
damn, sorry bro. It seems you lost half, at least 5,000iu is there and its fairly cheap. Some do it subcutaneously I hear some do IM. I like to do subcutaneously myself and it was the way I hear is best. Either way it water based and will get into you system fast.

Sorry to hear you lost some bro!
good luck
 
DangerousGrounds said:
damn, sorry bro. It seems you lost half, at least 5,000iu is there and its fairly cheap. Some do it subcutaneously I hear some do IM. I like to do subcutaneously myself and it was the way I hear is best. Either way it water based and will get into you system fast.

Sorry to hear you lost some bro!
good luck

Thanks. Half is a lot better than none.
 
I shot 2500 iu's with that first shot. I'll do it again in a week. You think that will work?
 
I never do its that way I hear some bros do a high dosed shot once or twice a week, but I like to personally spread it out being its water based by doing smaller doses ED over the period of time.
I can't say which is right or better, the way I've done it always worked well with me and I will continue to take as I did if I ever start another long cycle.
 
Top Bottom