home brew fina?

[bigerisbetter]

can anyone tell me how to use the coffe filter, or a link to tell me how? Also my last home brew batch came out brownish/orange much darker than what the pics said it should be. Would this be caused by the heating of product to separate the binders and dissolve the pellets? Is it still good to use, I did exactly as gotfina.com said to but I did heat a little longer to speed up the process.

 

[thate]

I skip the coffee filter step, but double filter with the whatmans and it comes out nice and golden.

 

[macDbol]

i agree,,pay the extra 5-8 bucks for an extra filter when u order a kit

 

[DangerousGrounds]

I skip the coffee filter step, but double filter with the whatmans and it comes out nice and golden.

don't skip coffee filter!
look at link bro how mine came out speeding up the process but clog you whatman filter in a hurry.

http://www.cuttingedgemuscle.com/Forum/showthread.php?s=&threadid=2349

or

http://209.51.136.163/forum/showthread.php?s=&threadid=3557

no need to buy filter use Ever Clear and it will flush out glues crap and come very clean do a few times then flush with warm water, like new.

the final product when baked 250 degree 30min came out to abot 48 to 50cc's. Clear gold as it can be. I never had a rubber top on so did 30 mins without fear of melting top.

NOTE: The sterile filter does not sterilize your final product. It is just a filter the is sterilized for filtering. Though it has been said that some laboratories use
those filters for filtering bacteria out of medicines. That bacteria are too large to get through the pores of those filters, but viruses are smaller and they can pass through. But it is rare to have a virus in such a solution.

If you desire to sterilize your final product and it is highly recommend, Bake it for 250 degrees for 15 min then let cool and repeat 2 more times. 250 degrees is not enough to melt the stopper. (Some advocate putting a pin in the stopper to let air escape, but being careful not to stick the pin in so far that your liquid spurts out as it heats.) This process is not to evaporate alcohol but heating and cooling 3 times is to kill bacteria. The boiling point for BA is over 400f, so your right, baking wont remove it. Also keep in mind that the BA(ie magic solution) is what allows us to suspend 75mg+ per ML and without it we risk having the tren/AAS precipitate and sit on the bottom of the vial

 

[bigerisbetter]

I still dont understand how to use the coffe filter step?

 

[DangerousGrounds]

please look

I brewed many batches with no problem I went and followed got fina link for a newer quicker way to do it/ http://www.gotfina.com/articles/make.html

did all just like it said came out dark color (from heat) when crushed tabs were dropped in solution with heated water. (I never did this always waited a day for to just dissolve.)

I did was fully dissolved dark within 30mins I then took out 5 cc's and closed cap on syringe for purging ect.

It says mix up after solution is completely dissolved and still warm mix throughly (I did) it than said add to water til boiling shut off let cool 20mins. I did the mix was a bit darker settled a bit but the binders fillers at bottom are dark instead of white (cause heat).

I will then do coffee filter method, I like it cleans colors and oxidation, done before 45 filter with coofee filter and funnel. Takes time I occasally heated up in microwave a few times to speed processs (not very hot 15 secs.

I had so much black gunk in filter even thou I left most in other vial it glogged coffe filter!
I was careful not to break and moved the filter a bit so dark glues were not all on bottom where straining. I carfully squeeze in ball gunk at bottom with coffee filter and slowly squeeze out few cc's oils without breaking coffee filter. Any tren left in the gunk at bottom, I used to use a coffee filter and slowly squeeze out a few cc's of oil. Probley potent

than filter through 45 syringe filter and bake 250 for 1/2 hr transfer into sterile vial. I used 5cc's oil to purge with 45 filter with after.

http://209.51.136.163/forum/attachment.php?s=&postid=34596

http://209.51.136.163/forum/attachment.php?s=&postid=34625

http://209.51.136.163/forum/attachment.php?s=&postid=34574

 

[macDbol]

the coffee filter step is only there so u wont clog the filter....if you dont use the coffee filter you can get roughly 20ml of oil through the watman filter with realative ease,,,,after that it begins to clog up,,,so if you makeing a 4g kit,,get another filter (ive done this 20+ times for myself and friends and never had a problem)