amps

[bubba10]

how are u supposed to get the stuff out of the amps, i always get a lot of air in my needle and cant get all the stuff out, what are some tips?

 

[Black Hamma]

tilt the amp and put the poker in the deepest part of solution and draw it up

 

[bubba10]

that is what i do but i always get a lot of air in there and when i flick the needle and try to get the air out before injecting some of the expensive steroid gets squirted out. would it be wise to extract the juice from the amp then squirt it into another needle then inject?

 

[theoak01]

pull the plunger all the wya back after its in there,letting the juice goto the bottom,push the plunger up till the air is out and once you see a drop on the needle point ur good to inject with no air

 

[thebull]

use a bigger needle to draw the fluid out like 18g. then switch to 23g and shoot the shit...

 

[the_Pikey]

If you are getting alot of air it means most likely that you are trying to pull on the stopper too quickly.

Pull on the stopper VERY slowly. Since this is not an airtight bottle, you cant inject air into the bottle to create that reverse vacuum-effect for easy drawing.

Just be patient, and too help it, before you break the amp, try running it under warm water so that its easier to draw.

Tilt the amp on its angle, and draw from the bottom corner. REALLY slow, almost not moving if you have to.